Targets from 1.0.2 compatible with MH 1.1.0?

[Heldin]

I created several targets in MH 1.0.2
can i use them in any way in MH 1.1.0 ?

thank-you

[joepal]

Most likely no. The base mesh is different.

If you're on windows: It shouldn't be any problem running both versions alongside one another in different directories. If you place the targets in the custom dir, 1.1 will find them too. Then you can see what happens.

[ThomasL]

Most likely no. The base mesh is different.

??? I may misremember, but I think that the base mesh changed between alpha 7 and 1.0.0 (alpha 8). MH 1.0.2 and 1.1.0 should have the same base mesh, which is called HM08.

[joepal]

I won't say either way atm, I'm home with the flu and not feeling very intellectual right now. I might be confusing it with, for example, the fact that most of the targets changed names.

Easiest is to simply test what happens.

[joepal]

No, I'm obviously not completely lost. The base.obj files differ between the 1.0.2 tag and the tip. After having removed the header from both files, the difference starts on line 19159:

1.0.2

Code: Select all

...
vt 0.831207 0.448087
vt 0.831860 0.447924
vt 0.831970 0.450918
...

1.1.0

Code: Select all

...
vt 0.833218 0.448147
vt 0.834363 0.447974
vt 0.834501 0.450931
...

Ok, so that's not geometry. But still, the files are different. So situation remains: only way to know is to test.

[duststorm]

They will work.
The topology of the basemesh has not changed.
Even the geometry of the basemesh has not changed. (the texture coordinates have been improved a little but that is no matter)

The macro targets have changed a little, however, so depending on what you created your targets relative to, there might be little differences perceivable.
But the targets will load and look mostly the same.

[ThomasL]

No, I'm obviously not completely lost. The base.obj files differ between the 1.0.2 tag and the tip. After having removed the header from both files, the difference starts on line 19159

Yes, that is the floor helper that was added at some point to keep the feet at the floor. Apart from that the base meshes should be identical.

[Heldin]

Thank-you for the inputs

I created them for MH 1.1.0 complete new -> because some worked and some not.